Thursday, December 20, 2012

Merry Christmas Banner

My friend Patti and I saw the cutest vintage felt Christmas banner at an occasional sale.  We decided right then and there that we would make banners for our homes this Christmas!  Here’s what we needed to get started…

felt in 2 different colors (the stiff kind with a sticky back is nice, but the traditional felt will also work)
tacky and fabric glue
fine black sharpie
regular scissors and pinking shears
1” wide grosgrain ribbon (about 7 feet)

We started by making templates for the letters. We freehanded (with a little help from a ruler) the letters onto the cardstock, and cut them all out. If you don’t feel comfortable free handing, you could use stencils or print them in a font from your computer. Our letters were about 5" high, and 4" wide, but you could make them any size.  Remember, you only need to make one template for the multiple letters (M, R, and S).
DSC_7084 copy

Next, you put the cardstock letters on one color of felt (we used white felt) and trace around them with the sharpie.  Some of the letters (E, R, C, and S) need to be flipped over before marking so that the ink marks are on the back side of the letter – the other letters can go either way. 

Now, cut the letters out with a pinking shears.  When you’re done, lay them all out to make sure you have all of your letters. 

Place these felt letters one at a time onto the other color of felt.  Take the Sharpie and mark around these letters with about a half inch border all around the letter. 

DSC_7091 copy

Now cut these out with the pinking shears.

DSC_7087 copy

Glue the letters together using fabric glue.  Make sure none of the Sharpie marks show on the front side.  At this point we realized that some of the letters were kind of floppy, and wouldn’t hang right.  We decided to “reinforce” each letter with some card stock on the back side.  In hindsight, I would have used that stiff type of felt to avoid this step.  You can even get the stiff type with a peal-off sticky back to use for your top letter so you wouldn’t have to glue them.

DSC_7085 copy
DSC_7082 copy

Now it’s time to glitter!  I used some very old glitter that was multicolored, and Patti mixed gold and green together for her banner.  Just write on the felt letter with the tacky glue, and generously sprinkle in on.  Give it a little tap to get the excess glitter off.  Don’t worry about the glitter lines being perfect – this is what gives it that charming homemade look.

DSC_7100 copy

The last step is to glue the letters to the ribbon.  Use fabric glue for this also.  Make sure you leave about 12” of ribbon on both sides of the letters for hanging.  Let it dry, and it’s ready to hang!

DSC_7180 copy2
DSC_7180 copy


With Love at Christmastime,

“Glory to God in the highest, and on earth peace among men with whom He is pleased.”  Luke 2:14

1 comment:

  1. I am so blessed to have a wife that makes our Home so special. I forgot how pretty it was after a fresh snowfall. Love Gregg


Please leave a comment...I would love to hear from you!